WALL CHASER WITH DUST EXTRACTOR

No, our MACROZA Vacuum cleaners are designed with ease of use in mind, even for those with no previous experience. The ergonomic design allows the machine to attach itself to the wall, which significantly reduces operator effort. In addition, we provide a detailed instruction manual and demonstration videos that guide step-by-step on how to make different types of chases (vertical, horizontal, curved). With a little practice, even novice users can quickly master the use of our wall chasers. We also offer technical support to answer any questions you may have during the learning process.

The MACROZA MVC30/1 vacuum system is designed to require minimal maintenance, which contributes to its efficiency and longevity. However, to keep it in optimum condition, we recommend the following practices:

● Daily cleaning: At the end of each day, empty the dust and debris tank.
● Filter check: Check and clean the filters regularly. Depending on usage, it may be
necessary to do this on a weekly basis.
● Hose inspection: Check the hose for obstructions or damage.
● Connection check: Make sure all connections are tight to maintain suction efficiency.
● Preventive maintenance: We recommend a general overhaul by a qualified technician every 6 months or 500 hours of use, whichever comes first. By following these guidelines, you will ensure optimum performance and prolong the life of your vacuum system.

MACROZA wall chasers are incredibly versatile and can work effectively on a wide range of materials commonly used in construction. Specifically, our machines are capable of cutting:

● Hollow brick
● Solid brick
● Cement block
● Cellular concrete
● Cement plaster
● Gypsum wall

It is important to note that our wall chasers are particularly powerful, allowing them to work even on harder materials where other machines on the market cannot. However, there are two types of materials that our wall chasers are not designed to cut: natural stone and reinforced concrete. The ability to cut this wide variety of materials, combined with our vacuum system, makes our wall chasers a versatile and efficient tool for almost any construction or renovation project.

While our MACROZA wall chasers (M95 and SC300 PRO models) are designed to work optimally with our MVC30/1 vacuum cleaner, they also offer some flexibility to work with other vacuum systems. However, it is important to consider several factors:

● Connection: Our machines have a specific connection system. Although it is possible to adapt other vacuum cleaners, it may require additional accessories to ensure a proper connection.
● Suction power: The MVC30/1 MACROZA vacuum cleaner is calibrated to provide the ideal suction power for our wall chasers. Other vacuums may not offer the same level of performance.
●Remote control system: Our MVC30/1 vacuum cleaner is automatically activated when the machine is switched on thanks to its electrical remote control system. This function may not be available with other dust extractors.
● Debris handling capability: The MVC30/1 is specifically designed to handle the dust and debris generated by our wall chasers. Other vacuums may not have the same capacity or durability. For these reasons, although it is possible to use other vacuums, we strongly recommend the use of the MVC30/1 MACROZA vacuum to ensure the best performance, efficiency and durability of your vacuum wall chaser system.

Safety is a priority in the design of our MACROZA wall chaser with dust collector. We offer multiple safety features to protect the operator:

● Protective design: The cutter cover encloses the cutter disc, protecting the operator from potential accidents, unlike other machines such as radials.
● Double electrical insulation: Our wall chasers comply with all electrical safety regulations, reducing the risk of electric shocks.
● Ergonomics: The design allows the machine to lean against the wall when cutting, reducing operator fatigue and the risk of loss of control.
● Dust reduction: The vacuum system significantly minimises the amount of dust in the air, protecting the operator’s respiratory tract.
● Automatic vacuum activation: The electrical remote control system ensures that the vacuum is automatically activated by the machine, guaranteeing a clean working environment at all times.
● Delayed vacuum shut-off: The vacuum continues to run for 10 seconds after the wall chaser has been switched off, ensuring that the pipe is completely cleaned.
● High quality milling cutters: We use milling cutters specifically designed for our machines, reducing the risk of breakage or dislodging during use. In addition, we provide detailed instructions for use and recommend the use of appropriate personal protective equipment to ensure maximum safety during operation.

To ensure that your MACROZA wall chaser with hoover is operating at its maximum capacity, we recommend following these guidelines:

1. Regular maintenance:
– Clean the machine daily with compressed air.
– Carry out a general overhaul every 100 working hours, paying particular attention to the brushes and bearings.

2. Sharpening of cutters:
– Check the state of sharpness of the milling cutter teeth approximately every working hour using the MACROZA sharpness tester.
– Sharpen or replace the cutter when it becomes blunt, using the MACROZA sharpening disc or a silicon carbide grinding stone 80 grit, Grade JK.

3. Correct use:
– Follow the gripping and operating techniques described in the instruction manual for each type of chase.
– Do not force the machine. Let the weight of the chaser do the work.

4. Vacuum system:
– Always use the MVC30/1 MACROZA vacuum cleaner to keep the work area clean and prevent dust from affecting the performance of the machine.
– Empty the dust collector tank regularly and keep the filters clean.

5. Bearings:
– Check the clearance in the milling shaft bearings monthly. Replace them at the slightest oscillation to prevent damage to the machine’s mechanics.

6. Brushes:
– Regularly check the condition of the brushes and replace them when necessary. Always replace both brushes at the same time.

7. Use original spare parts:
– Always use original MACROZA spare and replacement parts to ensure safety and optimum performance.

8. Proper training:
– Ensure that all operators are properly trained in the use of the machine. By following these recommendations, your MACROZA machine with vacuum cleaner will maintain its maximum performance capacity, guaranteeing efficiency and durability in the long term.

Like most high-powered power tools, the wall chaser generates a considerable level of noise during operation, especially when cutting hard materials. However, our advanced versions are designed to be quieter, with built-in sound dampening systems. It is recommended to always wear hearing protection while using the tool to avoid long-term hearing damage. Also, checking the manufacturer’s specifications can give you an idea of the decibel level generated by the machine.

Absolutely. They are specifically designed to be used both indoors and outdoors. In fact, indoor use is one of the great advantages of our integrated chaser and vacuum system. Here’s why it’s ideal for indoor work:

• Minimal dust production: Thanks to the milling technology that granulates the material instead of pulverising it, the amount of dust generated is drastically reduced.
• Efficient dust extraction system: The MVC30/1 MACROZA vacuum cleaner, with its 1200W power, efficiently captures the dust and debris generated during work.
• Automatic activation: The electrical remote control system ensures that the vacuum cleaner is automatically activated when the plow is switched on, guaranteeing a clean working environment right from the start. Delayed shut-off: The vacuum cleaner continues to run for 10 seconds after the wall chaser is switched off, ensuring that all residual dust is captured.
• 4 metre hose: Provides a wide operating radius for working indoors without the need to constantly move the vacuum cleaner.
• Low noise level: Compared to other methods of opening chases, our system is relatively quiet, which is crucial for work in occupied buildings.
• Low Noise Level: Compared to other groove-cutting methods, our system is relatively quiet, making it ideal for work in occupied buildings.
• Accuracy and cleanliness: The ability to make clean, accurate chases in a single pass minimises damage to walls and reduces the need for subsequent repair work.
• Versatilidad: Puede trabajar en diversos materiales comunes en interiores, como yeso, ladrillo hueco, o hormigón celular.

It is important to note that although our system significantly minimises dust production, we always recommend taking extra precautions when working indoors. This may include using tarps or barriers to isolate the work area, properly ventilating the space, and wearing appropriate personal protective equipment.